ERROR MESSAGES   221

A list of the error codes in Ensemble 2.0

In Ensemble 2.0 there are two kinds of error messages. One kind of error appears in a dialog box, and often suggests ways to recover from the problem, with buttons for you to click on. The second kind of error message appears as a white box in the center of the screen. Unlike the first kind of error, these boxes do not contain any buttons: you must use the keyboard to respond. In most cases, you have no choice but to exit Ensemble by performing one of the following actions:

_ Pressing the E key on the keyboard
_ Holding down the Ctrl and Alt keys, then pressing the Del key
_ Turning your computer off and then back on again

All error messages contain an error code. Write down this code in case you need to contact Geoworks Technical Support. Some error messages are caused by a temporary condition. In many cases, you can simply repeat the operation without the error reappearing. If the error occurs consistently, you should notify Geoworks Technical Support. Be prepared to describe exactly what you were doing at the time of the error. Sometimes the error message description is followed by some suggested ways to fix the problem.

The message listed here may differ slightly from the message on your computer screen. If the message includes specific information, such as a file name, this is indicated by a bracketed word. For example:

FM-06.
You cannot copy or move [name] to one of its own folders.
On the computer screen, [name] is replaced by the actual name of the file or folder.

GeoCalc Errors

top

CL-01:
The header and footer are so large there isn't any room for the document on the page.

CL-02:
Result should be a cell or range Unable to do automatic recalculation. No more memory. Close some windows or applications to free up memory.

CL-03:
There is nothing to print. You must turn on at least one of the GeoCalc print options (Print Spreadsheet, Print Graphics, Print Cell Notes) in order to print.

CL-04:
There are no series in the data to be charted. Please make sure that there is at least one row of numbers in the range that you select to create a chart.

CL-05:
For an X-Y Plot or a High/Low chart, you need at least 2 series of data.

CL-06:
There are no categories in the range you have selected. Please make sure that there is at least one column of numbers in the range that you select to create a chart.

CL-07:
There are too many series (rows) of data in the range that you have selected for charting. Please select a smaller range.

CL-08:
There are too many categories (columns) of data in the range that you have selected for charting. Please select a smaller range.

CL-09:
Could not find a starting date. When filling a series by date, the first (upper-left) cell of the range must contain a starting date.

CL-10:
Step value too large. When filling a series by date, the step must be between -90 and 90.

CL-11:
Unable to create a chart. There are already 256 charts in this document.

CL-12:
Unable to create a chart. No more memory. Close some windows or applications to free up memory.

CL-13:
Unable to create a chart. The selected range has no data. Please select a different range.
 

Document Control Errors

top

DC-01:
You cannot have more than 99 untitled documents. Close or remove some of these documents before continuing.

DC-02:
There is not enough free space on the disk to [perform the action]. Remove some files from the disk to free up space.

DC-03:
There are too many open files to [perform the action]. DOS, SHARE.EXE, or a network may be limiting the number of files that can be open at once. Consult the appropriate manual for assistance.

DC-04:
Could not [perform the action]. You may wish to try again. If the problem continues, the disk may contain errors or be unreadable.

DC-05:
The disk is write protected. Remove the write protection and click OK to try to [perform the action] again, or click Cancel.

DC-06:
Could not [action]. The document is already open. You may have it open in another application or, if you are on a network, someone else may be using it.

DC-08:
The document is damaged. You will need to restore it from a backup copy to continue.

DC-09:
The document [filename] cannot be opened because it was created with an older version of this application.

DC-10:
The document [filename] cannot be opened because it was created with a more recent version of this application.

DC-11:
The document [filename] is not a type that can be opened by this application.

DC-12:
Could not save document [filename] - DOS or network reports error [#]. You may wish to try again or consult your DOS or network manual.

DC-13:
An error was encountered trying to change the type of [expression]. The operation could not be completed.

DC-14:
An error was encountered while trying to change the password for [filename]. The operation could not be completed.

DC-15:
An error occurred while trying to rename the document. The operation could not be completed.

DC-16:
An error occurred while trying to back up the document. The operation could not be completed.

DC-17:
Are you sure you want to revert to the backup copy of An error occurred trying to revert to the backup copy of this document. The operation could not be completed.

DC-18:
An error occurred trying to set the default empty document. The operation could not be completed.

DC-19:
The name [filename] is not a legal name for a document for this application.
 

top

Program Switching Error Messages (DE-xx)
These error messages indicate problems switching to and from DOS programs.
 

DE-01.
Unable to run DOS program.

DE-02.
Could not find loader. You may need to re-install your software.

DE-03.
Not enough DOS memory to continue. A DOS program may not have released all the memory it used. Restart your computer.
 

top

GeoDex Errors
 

DX-01:
Your modem has not been configured. Check to see that your modem preferences have been set.

DX-02:
There is not enough memory available to continue. Try closing some applications.

DX-03:
Unable to connect with GeoPlanner.

DX-04:
The GeoDex address book document is empty.

DX-05:
A GeoDex document must be open before you can search for text.

DX-06:
New entries cannot be created in Browse View. Use the Card View for this task.

DX-07:
The address field for this entry is getting too big. Some text at the end of the address field may not be saved.

DX-08:
There is no telephone number to dial.

DX-09:
Cannot create another phone name. Use an existing name or leave the field blank.

DX-10:
Could not dial. The system serial driver was not loaded.

DX-11:
Unable to load the system serial driver. You will not be able to dial for GeoDex.

DX-12:
Couldn't dial. The port is currently in use.

DX-13:
The modem is not responding. Check the modem connections. Verify that the modem preferences are set correctly. Try dialing again.

DX-14:
There were some records that did not have any data in the index fields. These records have not been imported.
 

top

Database Library Errors
 

FF-01:
Memory is full. Requested action cannot be completed. Try closing some windows or applications to free up memory.

FF-02:
Default value for Integer/Real Number must be a number.

FF-03:
Min value is not a valid date.

FF-04:
Min value is not a valid time.

FF-05:
Min value is not a valid integer.

FF-06:
Min value is not a valid number.

FF-07:
Max value is not a valid date.

FF-08:
Max value is not a valid time.

FF-09:
Max value is not a valid integer.

FF-10:
Max value is not a valid number.

FF-11:
Max value for Integer/Real Number must be a number.

FF-12:
Min value cannot be greater than max value.

FF-13:
Default value cannot be less than min value.

FF-14:
Default value cannot be greater than max value.

FF-15:
A field with this name already exists in the database. Please change the name to something different.

FF-16:
Please enter a name for this field. There are already 256 fields defined for this database, which is the maximum number allowed. The new field was not added.

FF-17:
There is a problem with a number's exponent in this expression.

FF-18:
A reference to a nonexistent cell was encountered in this expression.

FF-19:
A closing quotation mark is missing in this expression.

FF-20:
A column number is too large in this expression.

FF-21:
A row reference is too large in this expression.

FF-22:
An illegal token was encountered while parsing this expression.

FF-23:
A general parser error occurred while checking this expression.

FF-24:
This expression is too complex (too many tokens). Try to break it up into two or more expressions.

FF-25:
An open-parenthesis is missing from this expression.

FF-26:
A closing parenthesis is missing from this expression.

FF-27:
The parser couldn't make sense of this expression.

FF-28:
The parser didn't expect any more characters after the end of this expression.

FF-29:
There is a mismatched parenthesis in this expression.

FF-30:
Encountered an unknown field name in this expression.

FF-31:
This expression is too complex (ran out of name space). Try to break it up into two or more expressions.

FF-32:
This expression is too complex (ran out of stack space). Try to break it up into two or more expressions.

FF-33:
This expression is too complex (name nesting too deep). Try to break it up into two or more expressions.

FF-34:
A relative row reference is out of range in this expression.

FF-35:
A relative column reference is out of range in this expression.

FF-36:
A nonexistent function was encountered in this expression.

FF-37:
A function has the wrong number of arguments in this expression.

FF-38:
A function's argument is of the wrong type in this expression.

FF-39:
A division by zero (which isn't allowed) was encountered in this expression.

FF-40:
An undefined name was encountered in this expression.

FF-41:
A circular reference was encountered in this expression. Make sure that an expression doesn't refer to itself through other expressions.

FF-42:
A reference to a circular name dependency was encountered in this expression.

FF-43:
A number is too big or too small in this expression.

FF-44:
A general error occurred while evaluating this expression.

FF-45:
Positive infinity.

FF-46:
Negative infinity.

FF-47:
Computational error.

FF-48:
This value should be between [value] and [value]

FF-49:
This [type of] value should not be less than [value].

FF-50:
This [type of] value should not be greater than [value].

FF-51:
This is not a valid [type of] value.

FF-52:
The expression defined for field [name] depends on another expression that, in turn, depends on [name]. This is called a `circular dependency,' and makes both expressions unusable. You might want to change this before continuing.

FF-53:
The import file has too many fields. Do you want to continue and import only 256 fields?

FF-54:
Import file has cell data type clash. The import process will be aborted.

FF-55:
Import file contains a field data that is too big. Do you still want to continue? If you answer yes, you will lose part of the field data.

FF-56:
Memory is full. Import cannot be completed. Try closing some windows or applications to free up memory.

FF-57:
Some fields have been pasted into a multi-record layout. Since fields are only allowed to be pasted into single-record layouts, the new fields will be inserted as ordinary pieces of text.

FF-58:
Some fields that have been pasted into this layout are copies of fields that do not currently exist in the database. They will not show up in the layout.

FF-59:
The import file has too many records. Only 16,383 records will be imported.
 

GeoFile Errors
 

FL-01:
Unable to allocate enough memory to complete the operation. Try closing some windows or applications.

FL-02:
You already have a layout called [name]. Choose a new name and try again.

FL-03:
You cannot delete the last layout. You must create another layout before you can delete this one.
 

top

File Manager Errors
 

File manager error messages often appear when you are working with items on the in GeoManager, such as the Wastebasket. In many cases, you can easily correct the problem and repeat the operation without further error.

FM-01:
Could not find the file or folder. It may have been deleted. If using a network, you may not have access to the file or folder. Rescan the drives to see the current view of an open window to determine if the file is really there.

FM-02:
Could not find the requested folder. Rescan the drives to see the current view of an open window to determine if the file is really there.

FM-03:
[name] cannot be accessed. It may already be in use or be a read-only file. If on a network, you may not have permission to access to this file. Some files can only be opened by one user at a time. Also, this message may appear if you attempt to save a read-only file.

vFM-04:
Unable to locate this drive. If on a network, the connection may have been lost. Restart your computer.

FM-05:
You cannot copy or move a file to itself. This usually occurs when you accidentally select the wrong file in the file selector dialog box. Select a different destination for the copy or move. This can also occur when dragging a file icon over the icon of the folder which contains it.

FM-06:
You cannot copy or move [name] to one of its own folders. This usually occurs when you accidentally select the wrong folder in the file selector dialog box. Select a different destination for the copy or move. This could also occur if you have several windows open and try to move a folder into one of the subfolders it contains.

FM-07:
The destination already contains a folder named [name], which cannot be overwritten because it contains the item you are moving or copying. This usually occurs when you accidentally select the wrong folder in the file selector dialog box. Select a different destination for the copy or move. This could also occur if you try to move a folder icon into its own window.

FM-08:
You cannot perform this operation with the root folder.

FM-09:
Could not open the folder. You already have the maximum number of 32 folders open. Close one or more open folders and try again.

FM-10:
Please re-enter the name using a valid name format. For DOS files, use the standard DOS format. For other applications and documents, the name can be up to 32 characters long. The DOS format is eight characters for the file name, followed by an optional period and 3-character extension.

FM-11:
[name] is not an application or document that can be opened directly.

FM-12:
You cannot format the drive containing the system software. You probably selected the wrong disk drive letter. Pick a different disk drive and try again.

FM-13:
There is not enough room on the destination disk to copy this file. Empty the Wastebasket or remove some files from the disk and try again.

FM-14:
[name] could not be thrown away because the Wastebasket is full. Empty the Wastebasket and try again. The Wastebasket can only hold a certain number of documents. Empty the Wastebasket from the File menu.

FM-15:
There is not enough memory available to perform this operation. Close some windows or applications and try again.

FM-16:
Another DOS program is already being launched. [name] cannot be launched at this time. Try launching (starting) the program again later.

FM-17:
Could not delete the folder [name]. It may not be empty or you may not have the privilege to delete it. The folder probably contains items which you are not allowed to delete, such as read-only files. Open the folder and try deleting each item inside individually to determine which caused this message.

FM-18:
This folder contains too many files. Not all of the filenames can be displayed. Ensemble can only display about 400 items in a folder window. The remaining items are in the folder, but will not display on the screen.

FM-19:
Could not rename the disk. You may not be allowed to change the name of the selected hard disk.

FM-20:
Could not create the folder [name]. There may not be enough room on the destination disk. Remove some files and folders to open up some additional space on the disk. If you are trying to create the folder on a floppy disk, try using a different floppy disk.

FM-21:
A new folder cannot be created at this level. The path is too long. You can rename higher-level folders to create a shorter path name. DOS has a maximum length for path names. If you have used long names for folders or have many folders within folders, this maximum can be exceeded.

FM-22:
Invalid characters in the volume name. Re-enter the volume name using valid characters. You can use the following characters in disk volume names: alphabetic characters, digits, and tilde ! @ # $ % ^ & ( ) _ - { }. You cannot use periods, commas, blanks, colons, asterisks, and any other keyboard characters not included above.

FM-27:
An error occurred during this operation. Please try again.

FM-28:
Cannot find the application for [name]. Try opening it from within an application. The document was created using a DOS application. You must start the application and then open the document from within it.

FM-29:
Unable to open the file. The file may be corrupted. If you tried opening the file by double-clicking, try opening it from within the application. If this is unsuccessful, you may have to use data recovery software to salvage your data.

FM-30:
Couldn't find [name]. Unable open the file. The file may have been deleted or moved. Choose Update Open Windows from the Desktop menu, and check again to see if the file is really there.

FM-31:
Could not open [name] because a required system file is missing.

FM-32:
[name] is not an application or document that can be opened.

FM-33:
There is not enough memory available to open the file as requested. Close windows and applications that you are not currently using and try again.

FM-34:
The application is too new to work with this version of the system software.

FM-35:
The application is too old to work with this version of the system software.

FM-36:
The application is already running on this system.

FM-37:
The application is incompatible with this version of the system software.

FM-38:
Could not locate a required system file. Restart your computer. You may need to re-install the software.

FM-39:
Unable to start a driver needed by the application. Restart your computer.

FM-40:
Unable to open a system file needed by the application. Restart your computer. You may need to re-install the software.

FM-41:
Disk too full to open [name]. Some applications need free disk space to open a document. Either delete unnecessary files or copy the file to another disk before trying to open the file again.

FM-42:
You are in the process of exiting the system. You cannot open anything at this time.

FM-43:
Unable to find the application that created [name]. If you know where to find the application, open the application first and then try opening the document from there.

FM-44:
Cannot open this item. It is no longer available on the network.

FM-45:
This folder has been moved or deleted from the file server.

FM-46:
The [name] item cannot be placed here.

FM-47:
The expected icon could not be found, so another will be substituted.

FM-48:
You cannot recover a file to the Wastebasket. Choose another location for the Recover operation.

FM-49:
Nothing was selected. You must select an item on which to perform the operation.

FM-53:
The folder [name] is currently open and cannot be deleted. Close the folder and try deleting it again.

FM-54:
This disk is write protected. Either remove the write protection tab (5.25-inch disks) or move the tab to the closed position (3.5-inch disks) and try the operation again.

FM-55:
The requested drive does not exist. If you are using a network drive, try exiting Ensemble, restarting your computer, and repeating the operation.

FM-56:
Could not find a formatted disk in the drive. Check that you have inserted a formatted disk into the drive and have closed the drive door. If the diskette is properly inserted and the disk drive door is closed, then you may need to format the diskette.

FM-57:
A file or folder with the same name already exists. Use a different name for the new item.

FM-58:
The disk format was unsuccessful. Check the disk and make sure that the drive door is closed.

FM-59, -60, -61, -62:
The disk format was unsuccessful. Try again, though this disk may be damaged. If the formatting fails a second time, use another disk. If you often get this type of problem, you may have a set of faulty disks or your disk drive may need service.

FM-63:
This disk contains a file or application that is currently in use. These items must be closed before the disk can be reformatted.

FM-64:
This disk is write protected. Either remove the write protection tab (5.25-inch disks) or move the tab to the closed position (3.5-inch disks) to reformat the disk.

FM-65:
There is not enough memory available to format the disk. Close windows and applications that you are not currently using before trying to format the disk.

FM-66:
The disk format was unsuccessful. Try again, though this disk may be damaged. If the formatting fails a second time, use another diskette. If you get this type of problem repeatedly, you may have a set of faulty disks or your diskette drive may need service.

FM-67:
There is not enough memory available to copy the disk. Close windows and applications that you are not currently using before trying to copy the disk.

FM-68:
The disk copy was unsuccessful. The source disk could not be read and may be damaged. Try opening the diskette icon to see if the documents and folders within are okay. If they are, try copying the items individually. If this is unsuccessful, your disk drive may be at fault; try repeating the operation on another computer. If the disk is damaged, you may be able to salvage data by using data recovery software.

FM-69:
The disk copy was unsuccessful. The destination disk could not be written to. Try again using a different disk. Try again. If you get this type of problem repeatedly, you may have a set of faulty disks or your diskette drive may need service.

FM-70:
The disk copy was unsuccessful. The destination disk may be damaged. Try again using a different disk. Try again. If you get this type of problem repeatedly, you may have a set of faulty disks or your diskette drive may need service.

FM-71:
The disk copy was unsuccessful. The destination disk contains a file or application that is currently in use. These items must be closed before you can copy over the disk.

FM-72:
The disk copy was unsuccessful. The destination disk is write protected. To copy over this disk you must remove (or move) the write protection tab.

FM-73:
The source and destination disks are incompatible. The destination disk cannot be formatted the same as the source disk. Try using the same drive and type of disk for both source and destination disks.

FM-74:
The source disk does not appear to be formatted. Please check the disk and try again.

FM-76:
First, you must select the item(s) you wish to open.

FM-77:
First, you must select the item(s) you wish to remove.

FM-78:
First, you must select the item(s) you wish to copy.

FM-79:
First, you must select the items(s) you wish to distribute.

FM-80:
Sorry, you cannot distribute this type of item. You can only distribute documents and document folders.

FM-85:
First you must select the item(s) you wish to remove.

FM-90:
You cannot add more than 50 items at one time.

FM-91:
You cannot add that type of item to this folder.

FM-106:
Could not delete or rename the folder [name]. It is a system folder. You cannot delete or change the names of system folders.

FM-107:
This drive cannot be accessed, there may be no disk in the drive or it may contain an unformatted disk. Place a formatted diskette in the drive, then try again. Or format the diskette in the drive.

FM-108:
This name contains no visible characters, please choose again.

FM-109:
The disk format has been canceled. This disk must be formatted again before it can be used. Try formatting the disk again.

FM-110:
There is not enough memory available to format the disk. To free up some memory, close windows and applications that you are not currently using.

FM-111:
The disk copy was unsuccessful. The destination disk may be damaged. Try again using a different disk.

FM-112:
The disk copy has been canceled. The destination disk will need to be reformatted before it can be used again. Format the destination disk, then try the disk copy again.

FM-113:
You must first select the item(s) you wish to recover. To recover items from the Wastebasket, you must first select the items you want to recover.

FM-129:
There is not enough room on the destination disk to copy this file. Remove some files from the destination disk to make room, or try copying to another disk.
 

top

Help System Error Messages (HP-xx)
These error messages appear when you try to view online help. Usually the problem is only with the online help section of the software, and does not affect the rest of Ensemble.
 

HP-01:
Error in help. File [name] not found. You may need to re-install your software. The online help file shown in the message is missing from Ensemble. You can continue using Ensemble, although you cannot view online help for this portion.

HP-02:
Error in help. Unable to find "context" section in help file [file name]. Please note the exact text of this message if it recurs. A portion of the help file has been damaged. You can continue using Ensemble, although you cannot view online help for this portion.

HP-03:
Error in help: The decompression library could not be loaded. You may need to re-install your software.

HP-04:
Error in help: The file [filename] is not a valid help file. You may need to re-install your software.

HP-05:
Error in help: The file [filename] is incompatible with the current software. You may need to re-install your software.
 

top

Operating System Errors (KR-xx and KRX-xx)
Operating system error messages have a KR or KRX prefix. Most of these errors have very terse text and an error code, and originate in the Ensemble control software.
For most of these errors, you must restart your computer. Try to exit Ensemble. Sometimes the error message will tell you to press E to exit. In many cases, though, this will not work. In either case, you should then restart your computer by pressing Ctrl+Alt+Del, or pressing the Restart button, or switching power off and then back on again, whichever is most appropriate for the situation. Often this will fix a problem. If the error persists, you should re-install the software.
 

top

KR-01 to KR-11, and KR-18
Messages KR-01 through KR-11 and KR-18 have no explanation in the error message itself. Often these messages indicate a temporary problem in the computer hardware. Restarting your computer may solve the problem.

KR-01:
Divide by zero.

KR-02:
Arithmetic overflow.

KR-03:
Array index out of bounds.

KR-04:
Coprocessor/memory parity error. Make sure you are not running any conflicting TSRs; have your RAM (memory) checked for defective chips.

KR-05:
Single-step complete.

KR-06:
Breakpoint hit.

KR-07:
Illegal instruction executed. See Fax on demand Document #212

KR-08:
Non-existent routine called.

KR-09:
Bad handle passed to system. See Fax on demand Document #212

KR-10:
Illegal segment passed to MoveBlock.

KR-18:
Unable to swap in block.
 

KR-12 to KR-xx The following error messages do not always require that you restart your computer. However, unless otherwise noted, try restarting your computer to solve the problem.
 

KR-12:
Out of system resource handles. If you consistently get this error, go into Preferences, click on GEOS, and raise the number of handles to 3500.

KR-13:
Cannot allocate required local memory.

KR-14:
Error in [name]. Operation cannot be completed.

KR-15:
Low on system resource handles. Please exit an application. Your computer is almost out of memory. Try exiting some applications and closing documents immediately. If you consistently get this error, go to the GEOS module of Preferences and raise the number of handles to 3500.

KR-16:
Conventional memory (below 640KB) is full.

KR-17:
Swap space is full. You may be low on disk space. Try exiting some applications and closing documents immediately. To make more disk space, try deleting some old files in your Document folder.

KR-20:
GEOS.INI file is damaged. Restore it from a backup or delete it and reinstall the system software.

KR-21:
Error restoring state. Please exit and restart the system.

KR-22:
Error reading VM file. The document or application data file may be damaged. If you continue to get this error message after restarting your system, you may have to remove the application from your local folder and add it again from a library, or use data recovery software to salvage the data in your document.

KR-23:
Cannot load a required system file (kernel). You may need to reinstall the system software.

KR-25:
Cannot load a required system file (vidmem). You may need to reinstall the system software.

KR-26:
Cannot load a required system file (keyboard). You may need to reinstall the system software.

KR-27:
Cannot load a required system file (ui). You may need to reinstall the system software.

KR-28:
Cannot find USERDATA\FONT folder. You may need to reinstall the system software.

KR-29:
No valid font found in PUBDATA\FONT folder.

KR-30:
Cannot load a required system file (sysfont). You may need to reinstall the system software.

KR-31:
DOS version too old. You need DOS version 3.0 or higher. Your computer has an old version of DOS installed.

KR-32:
Unable to register the disk containing the main system folder.

KR-33:
File system driver for drive [name] not loaded.

KR-34:
Unable to identify file system in use.

KR-35:
The system is unable to exit. Please restart your computer.

KRX-xx:
Undefined error in [name]. An error has been detected by this part of the program. The number is passed on from the detecting software.
 

top

Math Library Errors
 

MT-01:
Are you sure you want to delete the [expression] format? You cannot define a format without giving it a name. Enter a name and try again.

MT-02:
A format with this name already exists. Enter a new name and try again.

MT-03:
You have reached the limit for the number of user-defined formats. The operation could not be completed.

MT-04:
Unable to create format.
 

top

GeoPlanner Errors
 

PL-01:
The chosen day and month combination can never occur. Please select again.

PL-02:
Unable to connect with GeoDex.

PL-03:
You must open a GeoPlanner document before you can search for text from GeoDex.

PL-04:
GeoPlanner can only display dates between 1900 and 9999.

PL-05:
Please enter a Start Time that is earlier than the End Time.

PL-06:
The description for this event is getting too long. Some text may not be saved. Try separating the information into several events.

PL-07:
The description for this event is too long. Some of the text at the end of the event has been deleted.

PL-08:
The selected days contain more events than can be displayed in the window. Please select a smaller range of days.

PL-09:
The event time [number] is invalid. It has been changed back to [number].

PL-10:
The "From" date must be earlier than the "To" date.

PL-11:
GeoPlanner can't display more than 1000 events at once. Please select a smaller range of days.

PL-12:
The month is too small to hold event text. Do you want the empty month printed anyway? The year is too small to be printed. Try a larger page size.
 

top

Parse Library Error Messages
 

PL-02:
The formula you have entered has a mistake. It may contain an invalid cell reference or other error. Check the formula carefully for errors.

PL-03:
There is a missing or extra quotation mark. Ensure that you have an equal number of opening and closing quotation marks.

PL-04:
The formula you have entered has a mistake. There may be a cell reference that is too large. The column and cell of a cell reference cannot be greater than IV:8192.

PL-05:
The formula you have entered has a mistake. There may be a cell reference that is too large. The column and cell of a cell reference cannot be greater than IV:8192.

PL-06:
The formula you have entered has a mistake. It may contain a function, cell reference, or operator that does exist or is not allowed. Check the formula carefully for errors.

PL-07:
The formula you have entered has a mistake. Check the formula carefully for errors.

PL-08:
This formula is too complex (too many operators and functions). Try breaking it down into smaller parts or simplifying it.

PL-09:
The formula you have entered has a mistake. It may be that a function in this formula is missing an opening or closing parenthesis. Check the formula carefully for matching parentheses.

PL-10:
There are names in this formula that have not yet been defined. But they can't be defined because there are already too many. you will need to delete some unused names or use regular cell references in this formula to continue.

PL-11:
This formula is too complex (out of stack space). Try breaking it down into smaller parts or simplifying it.

PL-12:
There are too many names dependent on each other in this expression. Try breaking the expression down into simpler parts.

PL-13:
There are too many cell references that depend on each other in this expression. Try breaking the expression down into simpler parts.
 

top

Preference Options Error Messages (PR-xx)
These error messages are related to Preference settings that you have made.
 

PR-01:
Unable to locate the requested video display hardware. Check that the video display hardware is powered on and the cable connections are secure. You may get this message if you are attempting to change the video options to a setting your hardware does not support.

PR-02:
Unable to load a driver for the requested video display hardware. The driver is missing or damaged.

PR-03:
No dictionaries found. The files may be missing or damaged.

PR-04:
The printer is busy. The printer is probably switched off-line. Try switching it on-line.

PR-05:
The entered data is incorrect. The form is month (mm) /day (dd) /year (yyyy).

PR-06:
The entered data is incorrect. You must use an "am" or "pm" when requesting the 12-hour time format.
 

top

Preferences Library Errors
 

PRC-01:
The port is set for a different interrupt level than you specified.

PRC-02:
The port is currently in use, so you may not change its interrupt level.

PRC-03:
You cannot assign the same interrupt level to more than one port, as you've attempted to do with and another parallel port.

PRC-04:
WARNING: When you installed this software, the setup program detected a TSR or device driver in your CONFIG.SYS or AUTOEXEC.BAT that is incompatible with extended memory. Unless you are certain this TSR or device driver has been removed, you should not enable use of extended memory from this program.
 

top

Scrapbook Errors
 

SC-01:
Invalid scrapbook file.

SC-02:
This scrap format cannot be viewed in Scrapbook.

SC-03:
Not enough memory to paste scrap. Close some windows or applications to free up memory.

SC-04:
Not enough memory to cut scrap. Close some windows or applications to free up memory.
 

top

Printer Error Messages (SL-xx)
The SL error messages occur when you print documents. Often they indicate a temporary condition that you can correct.
 

SL-01:
The printer is not responding. Click OK to try printing again or Cancel to quit.

SL-02:
The printer [name] is warming up.

SL-03:
The printer is warming up.

SL-04:
The printer [name] needs to be serviced.

SL-05:
The printer needs to be serviced.

SL-06:
Check the paper feed error on the printer [name]. Click OK to continue printing.

SL-07:
Check the paper feed error on the printer. Click OK to continue printing.

SL-08:
The printer [name] is not responding and may be off-line. Return the printer to on-line status and click OK to try again or Cancel to quit.

SL-09:
The printer is not responding and may be off-line. Return the printer to on-line status and click OK to try again or Cancel to quit.

SL-10:
The printer [name] is out of paper. Refill the paper tray and click OK to continue.

SL-11:
The printer is out of paper. Refill the paper tray and click OK to continue.

SL-12:
The printer [name] is out of toner. Replace the toner and click OK to continue.

SL-13:
The printer is out of toner. Replace the toner and click OK to continue.

SL-14:
The printer [name] is off-line. Switch the printer on-line and click OK to continue, or Cancel to quit.

SL-15:
The printer is off-line. Switch the printer on-line and click OK to continue, or Cancel to quit.

SL-16:
The printer [name] needs attention. Check the printer connections and make sure it is on-line. You may have to turn the printer off and then on again. When the printer is ready, click OK to resume printing or click Cancel to stop printing this document.

SL-17:
The printer needs attention. Check the printer connections and make sure it is on-line. You may have to turn the printer off and then on again. When the printer is ready, click OK to resume printing or click Cancel to stop printing this document.

SL-18:
The printer [name] on the [number] port is not responding. Check the printer connections and click OK to try again or Cancel to quit.

SL-19:
The printer is not responding. Check the printer connections and click OK to try again or Cancel to quit.

SL-20:
The spool file has been deleted. Please print the document again.

SL-21:
Couldn't load the driver for printer [name]. Free up some memory by closing windows and applications you're not using. If you're still unable to print, the driver may have been deleted and you should try reinstalling the software.

SL-22:
Couldn't load the printer driver. Free up some memory by closing windows and applications you're not using. If you're still unable to print, the driver may have been deleted and you should try reinstalling the software.

SL-23:
Couldn't load the printer port driver. Free up some memory by closing windows and applications you're not using. If you're still unable to print, the driver may have been deleted and you should try reinstalling the software.

SL-24:
No printers have been installed. Before you can print, you need to install the printer (or printers) you will be using.

SL-25:
Printer [name] can't be used to print this type of file. The print mode (graphics or text) doesn't match. Try using another printer.

SL-26:
The printer can't be used to print this type of file. The print mode (graphics or text) doesn't match. Try using another printer.

SL-27:
There is not enough memory to print. Click OK to try again, or click Cancel to quit. You should close some windows or quit some applications to free up some memory before trying to print again.

SL-28:
Couldn't print. The VIDMEM driver was not found and may have been deleted and you should try reinstalling the software.

SL-29:
Couldn't print because the port is currently in use. Try again later.

SL-30:
The printer is not responding. Check the printer connections and try again. If you're still unable to print, check the printer settings.

SL-31:
The communications port for this printer is not working. Please select another port or make sure this port is working.

SL-32:
The printer [printer name] needs attention. Your print job has been canceled. Check the printer connections and make sure it is on-line. You may have to turn the printer off and then on again. When the printer is ready, resubmit your job.

SL-33:
The printer needs attention. Your print job has been canceled. Check the printer connections and make sure it is on-line. You may have to turn the printer off and then on again. When the printer is ready, resubmit your job.

SL-34:
The disk containing the output file is full. You need more room on the disk to which you are trying to print. Try removing old files from your disk to make room, or try printing the file to another disk.

SL-35:
A file system error occurred writing the output file. Try printing to a file again. Check that your disk is not full.

SL-36:
The output file cannot be opened. You may be trying to overwrite a file that is write protected. Try using another file name, or try placing the file in another folder.

SL-37:
Unable to convert page [number]. You are probably out of disk space.

SL-38:
Unable to convert document page. You are probably out of disk space.
 

top

Spell Library
 

SP-01:
Unable to delete this word from the user dictionary. The user dictionary may contain errors or be damaged.

SP-02:
You must enter the word to be added to the user dictionary first.

SP-03:
This word already exists in the user dictionary.

SP-04:
Unable to access the spelling dictionary. The file may be missing. You may need to reinstall the software.

SP-05:
Unable to open the spelling dictionary. The file may be missing. You may need to reinstall the software.

SP-06:
Unable to allocate enough memory to load the dictionary. Try closing some applications.

SP-07:
Unable to load the user dictionary into memory. Try closing some applications.

SP-08:
The spelling dictionary did not contain the desired language. You may need to change your dictionary preferences.

SP-09:
The dictionary is full. You must delete some words from the dictionary before more words can be added.

SP-10:
Unable to add this word to the user dictionary. The user dictionary file may be corrupted.
 

top

Spreadsheet Library
 

SS-01:
The name you provided is not valid or contains invalid characters. Names can only contain letters and underscores (_).

SS-02:
The definition you provided contains an invalid cell reference. Cell references have an alphabetic column and a numeric row (e.g., A1) and can be made absolute with $ signs (e.g., $A$1).

SS-03:
The column portion of a cell reference in the definition is invalid. Cell references have an alphabetic column and a numeric row (e.g., A1) and can be made absolute with $ signs (e.g., $A$1).

SS-04:
The row portion of a cell reference in the definition is invalid. Cell references have an alphabetic column and a numeric row (e.g., A1) and can be made absolute with $ signs (e.g., $A$1).

SS-05:
No name was provided for this definition. Enter a valid name and try again.

SS-06:
No definition was provided. The definition for a name consists of a valid formula, cell or range reference.

SS-07:
The name you provided already exists. Enter a new name and try again.

SS-08:
The definition for this name contains a mistake. It must be a valid formula, cell or range reference.

SS-09:
No more names can be defined. If you wish, you can delete some unnecessary names and try again.
 

top

Styles Library
 

ST-01:
This action would cause a style to be based on itself or on a derivative of itself, which is illegal.

ST-02:
A style with this name already exists.
 

top

Impex Library
 

TR-00:
An error occurred while importing or exporting.

TR-01:
The file you selected to import does not appear to be in the format you specified. You may have selected the wrong format, or the file may contain errors.

TR-04:
The selected format is not currently supported for export.

TR-05:
An error occurred during export.

TR-06:
An error occurred while accessing a file during import or export. The file or disk may contain errors or be damaged.

TR-07:
The disk is full and the operation could not be completed. You may wish to free up space on the disk by deleting files, then try again.

TR-08:
An error occurred while opening a file during import or export. The file or disk may contain errors or be damaged.

TR-09:
An error occurred while reading a file during import or export. The file or disk may contain errors or be damaged.

TR-10:
An error occurred while writing to a file during import or export. The file or disk may contain errors or be damaged.

TR-11:
The file you are trying to import or export is too large to be processed. Try splitting the file into two or more pieces and importing or exporting them one at a time.

TR-12:
Unable to allocate enough memory to complete the import or export. Try closing some applications.

TR-13:
An error occurred while trying to create an intermediate holding file. The disk may be full, or it may contain errors or be damaged.
 

top

User Interface Error Messages (UI-xx)
Like operating system error messages, user interface error messages indicate a problem with the Ensemble control software, and are usually not recoverable. Restart your computer.
 

UI-01:
The disk is too full to create the work area state file. Your hard disk is full. Delete some old files.

UI-02:
Could not create state file. DOS or network error encountered.

UI-03:
Unable to load the specific UI library file. You may need to re-install the software.

UI-04:
Unable to open the clipboard file.

UI-05:
Unable to allocate enough memory to collect pen input.

UI-06:
Unable to load the Handwriting Recognition Library.

UI-07:
Unable to load application.

UI-08:
Unable to load print spooler. You may need to re-install the software.

UI-09:
Unable to allocate undo space.

UI-12:
There is not enough memory available to start this application. Free some memory by closing windows and applications you are not using. Then try again.

UI-13:
The application could not be found. The file may be missing, or it may contain errors or be damaged. You may wish to re-install the software. Or, if you are attached to a network, there may be an error in the network configuration.

UI-14:
An associated library file could not be found. The file may be missing, or it may contain errors or be damaged. You may wish to re-install the software. Or, if you are attached to a network, there may be an error in the network configuration.

UI-15:
Could not read the disk. It may be damaged or unformatted. If this is a floppy drive, the door may not be closed or the disk may not be fully inserted. Or, if you are attached to a network, there may be an error in the network configuration.

UI-16:
The application is incompatible with this version of the system software. Applications written for version 1.x of Ensemble can't be used with version 2.0 of Ensemble.

UI-17:
There is not enough room on the disk. You may want to move files not in use to another disk or delete unnecessary files.

UI-18:
No working compatible video hardware found on this system. The video hardware on your computer is probably not compatible with Ensemble.

UI-19:
Unable to locate the expected disk: The drive in which it was located no longer exists. If you are attached to a network, there may be an error in the network configuration or you may not be logged in properly.

UI-20:
Unable to locate the expected disk: There is not enough memory to keep track of the disk. Close some windows or applications to free up memory, then try again.

UI-21:
Unable to locate the expected disk: The drive in which the disk is located is otherwise occupied. You may wish to try again later.

UI-22:
Unable to locate the expected disk: You are not connected to the appropriate server to which the disk belongs.

UI-23:
Unable to locate the expected disk: You do not have permission to use the appropriate network disk volume.

UI-24:
Unable to locate the expected disk: There is no free drive letter to which the network disk may be mapped.

UI-25:
Unable to open the shared token database file using the path specified in the GEOS.INI. Restart your computer. You may need to re-install your software.

UI-26:
Unable to open the local token database file in the PRIVDATA folder. Try deleting the file. Restart your computer. You may need to re-install your software.

UI-27:
The shared token database file on the path specified in the GEOS.INI file is out of date and must be replaced. Restart your computer. You may need to re-install your software.

UI-28:
The system is shutting down. There's too much activity already in progress. Please close active applications and try again.
 

top

GeoWrite Errors
 

WR-02:
A section with this name already exists.

WR-03:
Cannot delete this flow region. Your master page must have at least one region into which it can flow text.

WR-04:
Cannot delete this flow region. Your page must have at least one region into which it can flow text.

WR-05:
No data was found to merge. Data you wish to merge must be placed on the clipboard. Use the Copy or Export command in the application where data is stored.

WR-06:
There are no fields to be found on the clipboard. The data on the clipboard may not be the right type for merging. Be sure you are correctly using the Copy or Export command in the application where the data is stored.

WR-07:
A merge field specified in your document was not found in the merge data. The field names must match exactly. Check to see that all field names are correctly spelled and that the merge data is correct also.

WR-08:
An error was encountered while merging. The operation could not be completed.

WR-09:
The page setup values that you entered will result in columns that are too narrow. Try reducing the number of columns or the column spacing or the page margin settings or increasing the page width.

WR-10:
Some of the names for help are too long. Would you like them to be truncated? The name [name] could not be truncated.

WR-11:
Could not find the help compression library. You may need to re-install your software.

WR-12:
Could not allocate enough memory to process the help file. Try closing some applications.

WR-13:
Encountered a compaction error while processing the help file.

WR-13:
The page setup values that you entered will result in columns that are too short. Try reducing the page margin settings or increasing the page height.

WR-14:
The page size values that you entered will result in columns that are too narrow. Try increasing the page width.

WR-15:
The page size values that you entered will result in columns that are too short. Try increasing the page height.

top